ICTQual AB Level 3 Diploma in QA/QC Piping & Welding Inspector

The ICTQual AB Level 3 Diploma in QA/QC Piping & Welding Inspector is an advanced professional qualification designed to develop in-depth technical expertise and industry readiness in quality assurance, quality control, and inspection practices. This diploma is ideal for individuals with prior knowledge or experience in piping and welding inspection who are seeking to advance their career into more specialised or supervisory roles.

The course focuses on complex inspection tasks, piping stress evaluation, welding defect analysis, advanced non-destructive testing (NDT) methods, and documentation required for high-risk industrial environments. Learners will be trained in root cause analysis, audit procedures, project quality planning, and the application of international standards in fabrication and welding operations.

This diploma is particularly suited for professionals working in sectors such as oil and gas, marine engineering, petrochemical processing, infrastructure development, and power generation. It equips learners with the skills needed to oversee QA/QC operations, manage inspection teams, and ensure regulatory compliance in welding and piping systems.

Whether you’re a technician aiming for senior inspection roles or an industry professional seeking to formalise your expertise, the ICTQual AB Level 3 Diploma in QA/QC Piping & Welding Inspector provides the qualifications and practical competencies necessary to perform confidently and effectively in demanding engineering environments.

Course overview

Level 3 Diploma in QA/QC Piping & Welding Inspector

To enrol in ICTQual AB Level 3 Diploma in QA/QC Piping & Welding Inspector, learner must meet the following entry requirements:

  • Age Requirement: Learners must be 18 years of age or older at the time of registration.
  • Educational Background: An equivalent qualification or relevant certification in welding, piping, quality control, or inspection.
  • Industry Exposure: It is recommended that learners have at least 1 to 2 years of industry experience in piping inspection, welding supervision, or QA/QC-related roles to support practical understanding of the course content.
  • English Language Proficiency: Learners must possess intermediate English proficiency, including the ability to read technical documentation, write inspection reports, and understand standard engineering terminology.

This qualification, the ICTQual AB Level 3 Diploma in QA/QC Piping & Welding Inspector, consists of 6 mandatory units.

  1. Advanced QA/QC Systems & Continuous Improvement Models
  2. Piping Stress & Weld Integrity Assessment
  3. Advanced NDT Techniques: Ultrasonic & Radiographic Testing
  4. Failure Mode Analysis, Root Cause & Corrective Measures
  5. Audit Procedures, Risk Management & Statistical Quality Control
  6. Project Documentation & Quality Assurance Processes

Learning Outcomes for the Study Units:

Advanced QA/QC Systems & Continuous Improvement Models

By the end of this unit, the learner will be able to:

  • Understand the structure and function of advanced QA/QC systems in industrial environments
  • Apply continuous improvement models such as PDCA, Kaizen, and Six Sigma within inspection activities
  • Evaluate the performance of quality systems using quality metrics and key indicators
  • Contribute to the development of standard operating procedures and inspection workflows
  • Support long-term quality enhancement across piping and welding operations

Piping Stress & Weld Integrity Assessment

By the end of this unit, the learner will be able to:

  • Understand the impact of stress on piping systems and welded joints
  • Identify factors affecting stress and strain in industrial pipework
  • Assess weld integrity through inspection, testing, and alignment verification
  • Interpret stress analysis results and support corrective planning
  • Assist engineers in maintaining weld safety and compliance under pressure conditions

Advanced NDT Techniques: Ultrasonic & Radiographic Testing

By the end of this unit, the learner will be able to:

  • Explain the principles and applications of ultrasonic testing (UT) and radiographic testing (RT)
  • Select and apply appropriate NDT techniques based on material and defect type
  • Operate NDT equipment under supervision and follow international testing protocols
  • Interpret basic UT and RT results and distinguish between acceptable and rejectable flaws
  • Ensure inspection activities align with safety standards and quality procedures

Failure Mode Analysis, Root Cause & Corrective Measures

By the end of this unit, the learner will be able to:

  • Identify common failure modes in piping systems and welded joints
  • Apply structured problem-solving methods such as 5 Whys and Fishbone Diagrams
  • Assist in root cause investigations and recommend corrective and preventive actions
  • Document failure reports in alignment with QA/QC documentation practices
  • Contribute to process reliability by supporting incident analysis and resolution

Audit Procedures, Risk Management & Statistical Quality Control

By the end of this unit, the learner will be able to:

  • Understand internal and external audit procedures in the context of QA/QC
  • Assist in preparing for and conducting quality audits in piping and welding projects
  • Use basic risk management tools to identify and report potential quality risks
  • Apply statistical process control (SPC) methods to monitor and evaluate inspection data
  • Support continual improvement by analysing trends and audit results

Project Documentation & Quality Assurance Processes

By the end of this unit, the learner will be able to:

  • Prepare and maintain quality assurance documentation for piping and welding projects
  • Complete inspection test plans (ITPs), checklists, and traceability records
  • Communicate effectively through structured quality reports and records
  • Ensure all inspection records are compliant with project and regulatory requirements
  • Support quality handovers and final documentation for project completion

The ICTQual AB Level 3 Diploma in QA/QC Piping & Welding Inspection provides a strong foundation for learners aiming to grow into advanced inspection roles, lead quality teams, and specialise in piping and welding operations across complex industrial environments. With this diploma, learners are equipped to pursue higher qualifications and take on greater responsibilities in QA/QC management and technical supervision.

Academic Progression

  1. Advance to Higher-Level Diplomas
    Learners can progress to the ICTQual AB Level 4 Diploma, which focuses on quality management systems, advanced welding specifications, vendor audits, and team leadership. Further progression through Levels 5, 6, and 7 supports long-term goals in consultancy, global quality governance, and executive QA leadership.
  2. Specialised Technical Certifications
    Learners may pursue additional credentials such as:
    • NDT Level II or III Certification
    • Welding Inspector Certification (CSWIP, AWS equivalent)
    • ISO 9001 Internal Auditor or Lead Auditor Certification
    • Risk-Based Inspection (RBI) and Asset Integrity courses

Career Development Opportunities

  1. Advanced Job Roles
    Graduates of Level 3 are qualified for roles including:
    • QA/QC Inspector (Piping & Welding)
    • Senior Welding Technician
    • NDT Level II Technician
    • Inspection Coordinator
    • Quality Systems Assistant
  2. Industry Sectors
    Skills gained through this diploma are applicable across:
    • Oil and gas operations
    • Petrochemical refineries
    • Structural fabrication workshops
    • Marine and offshore engineering
    • Construction and power generation

Professional Growth and Site Readiness

  1. Improved Responsibility and Supervision
    Learners are prepared to handle more complex inspection activities, contribute to failure investigations, supervise junior inspectors, and support documentation for audits and regulatory compliance.
  2. Pathway to Leadership
    With continued learning and experience, graduates can evolve into lead inspector, QA/QC supervisor, or client-side quality representative roles.

FAQs

This course is ideal for those who have completed the Level 2 Diploma or have relevant industry experience in QA/QC, welding, or piping. It’s recommended for technicians, junior inspectors, or quality assistants aiming to move into more senior roles.

To enrol, learners must:

  • Be at least 18 years old
  • Have completed the ICTQual AB Level 2 Diploma or an equivalent qualification
  • Possess 1–2 years of relevant industry experience (recommended)
  • Have intermediate English proficiency

ICTQual AB Level 3 Diploma in QA/QC Piping & Welding Inspector is 30 Credits training program. As this Training program have mandatory assessment which will be conducted through Approved Training Centers.

ICTQual AB allows to offer Level 3 Diploma in QA/QC Piping & Welding Inspector in various formats, including online, in-person, or a combination of both. Participants can choose the format that best fits their schedule and learning preferences. But final decision is made by ATC.

Yes, ICTQual AB Level 3 Diploma in QA/QC Piping & Welding Inspector consist of 6 mandatory assessments . These assessments are designed to evaluate participants’ comprehension of course material and their capacity to apply concepts in practical situations. It is mandatory to pass assessments with a minimum score of 75%